Check before tuning
P0335Crankshaft position sensor "A" circuit
No or wrong signal from the crankshaft sensor.
Repair before tuning. Ignition, timing and sensors · standard OBD code, same meaning on every make.
What P0335 means
No or wrong signal from the crankshaft sensor. P0335 is a generic OBD code (SAE J2012), so the meaning is the same on every make. The limits that trigger it come from the ECU calibration of your engine.
Usual causes
Failed sensor, damaged reluctor ring, wiring fault.
In the workshop
Repair. Often causes non-start or stalling.
Can I tune a car with P0335?
Not until it is fixed. A tune raises boost, fuel and torque; with P0335 active the engine already runs outside its targets, so the ECU limits power or the fault gets worse. Fix the cause, clear the code, check live data, then read the ECU.
Before any read or write, see ECU read methods. New to the terms? The chiptuning glossary explains them.