Check before tuning

P0300Random / multiple cylinder misfire

Misfires detected on more than one cylinder.

Repair before tuning. Ignition, timing and sensors · standard OBD code, same meaning on every make.

What P0300 means

Misfires detected on more than one cylinder. P0300 is a generic OBD code (SAE J2012), so the meaning is the same on every make. The limits that trigger it come from the ECU calibration of your engine.

Usual causes

Worn plugs or coils, injector fault, vacuum leak, low fuel pressure, ignition timing too aggressive.

In the workshop

Fix ignition and fuel before tuning. Petrol Stage 2 needs fresh plugs, often one step colder.

Can I tune a car with P0300?

Not until it is fixed. A tune raises boost, fuel and torque; with P0300 active the engine already runs outside its targets, so the ECU limits power or the fault gets worse. Fix the cause, clear the code, check live data, then read the ECU.

Before any read or write, see ECU read methods. New to the terms? The chiptuning glossary explains them.