Reference

ECU index

The engine control units we meet most often: who makes them, where they are used and how they are read.

EDC16CP34 Bosch · VAG 1.9 / 2.0 TDI, PSA & Ford diesel OBD · bench
EDC17C46 Bosch · VAG 2.0 TDI common rail OBD · bench
EDC17C64 Bosch · VAG 1.6 / 2.0 TDI EA288 OBD · bench
Simos PCR2.1 Continental · VAG 1.6 / 2.0 TDI EA189 OBD maps · bench
DCM6.2 Delphi · VAG 1.6 TDI EA288, Ford OBD · bench
SID807 EVO Continental · PSA / Ford / Volvo 1.6 diesel OBD · bench
MD1CP001 Bosch · Mercedes OM654 / OM656 diesel Bench
MG1CS003 Bosch · BMW petrol engines Bench

OBD or bench?

OBD means the ECU is read and written through the diagnostic port, with the ECU still in the car. It is quick and leaves no trace on the unit. On many ECUs it reaches only the calibration (the maps), not the whole flash.

Bench means the ECU is taken out and connected directly, in boot mode or through a debug interface. You get the complete flash: boot, program and calibration. Newer protected ECUs, such as the Mercedes MD1 family or BMW MG1, are usually bench-only.

Why the read method matters

  • An OBD read is not a full backup. Keep a bench read whenever the ECU is open anyway.
  • A stock calibration from OBD can be combined with the program from a bench read to rebuild a stock bench file, as long as both are the same software. See the tech notes.
  • Checksums are corrected by the writing tool on most units, but always check before writing.

Missing an ECU?

This index grows with the jobs that come through the workshop. If your car is not listed, use the vehicle search. It covers far more engines than this page.