Check before tuning
P0016Crankshaft / camshaft position correlation (bank 1, sensor A)
Camshaft and crankshaft signals are out of their normal relation.
Repair before tuning. Ignition, timing and sensors · standard OBD code, same meaning on every make.
What P0016 means
Camshaft and crankshaft signals are out of their normal relation. P0016 is a generic OBD code (SAE J2012), so the meaning is the same on every make. The limits that trigger it come from the ECU calibration of your engine.
Usual causes
Stretched timing chain, jumped belt, faulty cam adjuster or sensor, wrong oil.
In the workshop
Mechanical check of timing before any work. Never tune an engine with a stretched chain.
Can I tune a car with P0016?
Not until it is fixed. A tune raises boost, fuel and torque; with P0016 active the engine already runs outside its targets, so the ECU limits power or the fault gets worse. Fix the cause, clear the code, check live data, then read the ECU.
Before any read or write, see ECU read methods. New to the terms? The chiptuning glossary explains them.