Delphi DCM6 · Diesel
Ford 2.0 TDCi 185 hp
Focus
The Ford 2.0 TDCi 185 hp (136 kW) runs a Delphi DCM6 engine control unit. Our archive holds 2 calibration projects for it, model years 2015.
Spec sheet
- Make
- Ford
- Fuel
- Diesel
- Factory power
- 185 hp / 136 kW
- ECU
- Delphi DCM6
- Model years
- 2015
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the DCM6 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Ford 2.0 TDCi 185 hp. Select: Cars/Vans → Ford → Focus → 2.0 TDCi – 185hp.
ASF Academy
Learn to tune the DCM6 yourself
Delphi DCM6 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this DCM6?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the DCM6
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Ford 2.0 TDCi 177 hp | DCM6 | Kuga | 2016 | 3 |
| Ford 2.0 TDCi 120 hp | DCM6 | Kuga | 2015 | 2 |
| Volkswagen 2.0 TDI 205 hp | DCM6 | Transporter | 2018 | 2 |
Stage 1
Stage 2
Stage 1