Engine control unit
Delphi DCM6
Used by Ford, Volkswagen. 5 engines and 13 calibration projects in our archive.
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Ford 2.0 TDCi 180 hp | DCM6 | Kuga, S-max | 2015–2016 | 4 |
| Ford 2.0 TDCi 177 hp | DCM6 | Kuga | 2016 | 3 |
| Ford 2.0 TDCi 120 hp | DCM6 | Kuga | 2015 | 2 |
| Volkswagen 2.0 TDI 205 hp | DCM6 | Transporter | 2018 | 2 |
| Ford 2.0 TDCi 185 hp | DCM6 | Focus | 2015 | 2 |
Have an original read from a DCM6? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →
ASF Academy
Learn to tune the DCM6 yourself
Delphi DCM6 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Need a file for this DCM6?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1