Delphi DCM3.2 · Diesel
Ford 2.0 TDCi 140 hp
S-max
The Ford 2.0 TDCi 140 hp (103 kW) runs a Delphi DCM3.2 engine control unit. Our archive holds 3 calibration projects for it across 2 hardware numbers and 1 software versions, model years 2012–2015.
Spec sheet
- Make
- Ford
- Fuel
- Diesel
- Factory power
- 140 hp / 103 kW
- ECU
- Delphi DCM3.2
- Model years
- 2012–2015
- Hardware numbers
- 2
- Software versions
- 1
- EVC WinOLS projects
- 3 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the DCM3.2 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Ford 2.0 TDCi 140 hp. Select: Cars/Vans → Ford → S-max → 2.0 TDCi – 140hp.
Hardware numbers
ECU part numbers in our archive (2 in total). Check the label on your ECU.
Software versions
3 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
Built against verified projects
- ✓DTC map pack 5 packs
Your file is built by our workshop against verified projects for the DCM3.2.
Order this file →ASF workshop · map definitions
Map definitions for the DCM3.2
We tune this ECU in our own workshop. These files are ready in the ASF archive, so your file is made faster and with named maps instead of guesses.
ASF Academy
Learn to tune the DCM3.2 yourself
Delphi DCM3.2 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Ford only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this DCM3.2?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the DCM3.2
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mercedes-Benz 2.2 CDI 136 hp | DCM3.2 | C-Class, E-Class | 2007–2009 | 82 |
| Mercedes-Benz 2.1 CDI 170 hp | DCM3.2 | C-Class, E-Class | 2006–2009 | 30 |
| Mercedes-Benz 2.2 CDI 170 hp | DCM3.2 | C-Class, E-Class | 2006–2008 | 34 |
| Mercedes-Benz 2.1 CDI 136 hp | DCM3.2 | C-Class, E-Class | 2007–2009 | 29 |
| SsangYong 2.7 Diesel 163 hp | DCM3.2 | Rexton, Rodius | 2005–2011 | 21 |
| Mercedes-Benz 2.0 CDI 136 hp | DCM3.2 | C-Class | 2005–2009 | 6 |
| Mercedes-Benz 2.0 CDI 170 hp | DCM3.2 | C-Class | 2009 | 3 |
| SsangYong 2.7 Diesel 186 hp | DCM3.2 | Rexton | 2007–2008 | 10 |
| Kia 2.9 CRDi 184 hp | DCM3.2 | Carnival | 2006–2008 | 10 |
| Renault 1.5 dCi 88 hp | DCM3.2 | Clio, Megane | 2011–2012 | 8 |
Stage 1
Stage 2
Stage 1