Engine control unit
Delphi DCM3.2
Used by Mercedes-Benz, SsangYong, Renault, Kia, Peugeot, Ford, Nissan. 21 engines and 271 calibration projects in our archive.
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mercedes-Benz 2.2 CDI 136 hp | DCM3.2 | C-Class, E-Class | 2007–2009 | 82 |
| Mercedes-Benz 2.1 CDI 170 hp | DCM3.2 | C-Class, E-Class | 2006–2009 | 30 |
| Mercedes-Benz 2.2 CDI 170 hp | DCM3.2 | C-Class, E-Class | 2006–2008 | 34 |
| Mercedes-Benz 2.1 CDI 136 hp | DCM3.2 | C-Class, E-Class | 2007–2009 | 29 |
| SsangYong 2.7 Diesel 163 hp | DCM3.2 | Rexton, Rodius | 2005–2011 | 21 |
| Mercedes-Benz 2.0 CDI 136 hp | DCM3.2 | C-Class | 2005–2009 | 6 |
| Mercedes-Benz 2.0 CDI 170 hp | DCM3.2 | C-Class | 2009 | 3 |
| SsangYong 2.7 Diesel 186 hp | DCM3.2 | Rexton | 2007–2008 | 10 |
| Kia 2.9 CRDi 184 hp | DCM3.2 | Carnival | 2006–2008 | 10 |
| Renault 1.5 dCi 88 hp | DCM3.2 | Clio, Megane | 2011–2012 | 8 |
| Renault 1.5 dCi 85 hp | DCM3.2 | Twingo | 2009–2012 | 7 |
| Mercedes-Benz 2.1 CDI 163 hp | DCM3.2 | C-Class | 2008–2013 | 5 |
| Peugeot 2.0 HDi 163 hp | DCM3.2 | RCZ, 2.0 16V | 2011 | 4 |
| SsangYong 2.0 CRDi 141 hp | DCM3.2 | Kyron, Actyon | 2007–2008 | 4 |
| SsangYong 2.7 Diesel 162 hp | DCM3.2 | Rexton | 2007–2010 | 3 |
| Mercedes-Benz 2.1 CDI 129 hp | DCM3.2 | Sprinter | 2014 | 3 |
| Renault 1.5 dCi 75 hp | DCM3.2 | Clio | 2011–2012 | 3 |
| Ford 2.0 TDCi 140 hp | DCM3.2 | S-max | 2012–2015 | 3 |
| Mercedes-Benz 2.1 CDI 149 hp | DCM3.2 | E-Class | 2007 | 2 |
| Mercedes-Benz 2.0 CDI 184 hp | DCM3.2 | C-Class | 2009 | 2 |
| Nissan 1.5 Diesel 90 hp | DCM3.2 | Note | 2011 | 2 |
ASF workshop · map definitions
Map definitions for the DCM3.2
We tune this ECU in our own workshop. These files are ready in the ASF archive, so your file is made faster and with named maps instead of guesses.
–DAMOS / A2LOn request
–MappackOn request
✓Fault code (DTC) package4 parameter packages for DCM3.2
Have an original read from a DCM3.2? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →
ASF Academy
Learn to tune the DCM3.2 yourself
Delphi DCM3.2 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Need a file for this DCM3.2?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1