Sprinter 220 CDI with MRD1: unlocking four 2022-on ECUs with Korhex

Four Bosch MRD1 engine ECUs (MD1CP001) from 2022-on Mercedes Sprinter 220 CDI vans came in from a customer in Bulgaria. All four were unlocked with Korhex on the first attempt, with the ECU housing opened.

Watch the job on Instagram

The job

Item Detail
Vehicle Mercedes Sprinter 220 CDI, 2022 on
ECU Bosch MRD1 (MD1CP001)
Units 4, all unlocked on the first attempt
Tool Korhex
Access ECU opened

Why these ECUs need unlocking

A tuning tool cannot work with the calibration on these units until the ECU’s protection has been dealt with. That makes unlocking a separate job that comes before any file work. Plan for the extra bench time: the van is off the road while the ECU is out and open.

What Korhex does

Flex’s 8.17.0.0 release notes list Korhex support for Bosch MD1CP001 and describe it as electromagnetic fault injection on the SPC5777 processor. We are not publishing the step-by-step procedure here.

Check before you start

  • Identify the ECU first. Confirm the hardware and software numbers on the unit in front of you. The Sprinter range uses more than one ECU family, so the model name alone does not tell you.
  • Treat four vans as four vans. This is what worked on these units, not a guarantee for every MRD1.

Takeaway

On a 2022-on Sprinter 220 CDI with MRD1, budget for opening the ECU and unlocking it before any calibration work. Once it is unlocked, the unit can move on to normal file work. More on this ECU in the ECU index.