Visteon LANDROVERVISTEONDCU10X · Diesel
Ford 2.2 TDCi 85 hp
Transit
The Ford 2.2 TDCi 85 hp (63 kW) runs a Visteon LANDROVERVISTEONDCU10X engine control unit. Our archive holds 2 calibration projects for it across 1 hardware numbers and 1 software versions, model years 2007.
Spec sheet
- Make
- Ford
- Fuel
- Diesel
- Factory power
- 85 hp / 63 kW
- ECU
- Visteon LANDROVERVISTEONDCU10X
- Model years
- 2007
- Hardware numbers
- 1
- Software versions
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the LANDROVERVISTEONDCU10X on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Ford 2.2 TDCi 85 hp. Select: Cars/Vans → Ford → Transit → 2.2 TDCi – 85hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
Software versions
2 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the LANDROVERVISTEONDCU10X yourself
Visteon LANDROVERVISTEONDCU10X is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Ford only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this LANDROVERVISTEONDCU10X?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1