Delphi DCM6.1 · Diesel

Ford 2.0 TDCi 179 hp

Mondeo · S-max · Kuga · Edge · Galaxy

The Ford 2.0 TDCi 179 hp (132 kW) runs a Delphi DCM6.1 engine control unit. Our archive holds 69 calibration projects for it across 3 hardware numbers and 2 software versions, model years 2015–2018.

Spec sheet

Make
Ford
Fuel
Diesel
Factory power
179 hp / 132 kW
ECU
Delphi DCM6.1
Model years
2015–2018
Hardware numbers
3
Software versions
2
EVC WinOLS projects
69 .ols
File format
EVC WinOLS (.ols) · BIN

Tuning & software solutions

Available for the DCM6.1 on this engine – combine them in one file.

Stage 1DPF / FAPEGRDTC offVmax
RPM →Power · Torque
Stage 1StockIllustration – real figures for your engine ↓

Power & torque gains

Stage 1 power, torque and dyno chart for the Ford 2.0 TDCi 179 hp. Select: Cars/Vans → Ford → Mondeo / S-max / Kuga → 2.0 TDCi – 179hp.

Hardware numbers

ECU part numbers in our archive (3 in total). Check the label on your ECU.

FS7A14C204DNH×4FV4114C204AGE×2FS7A14C204CVE×1

Software versions

69 EVC WinOLS (.ols) projects across 2 software versions. Calibrations differ per version – a file is always built for your exact one.

GV6114C204DM×2F1GA12A650APG×1
EVC WinOLS reseller database46,797 ASF Tuning projectsDownload them directly in WinOLS with EVC credits.
Buy EVC credits →
Map definitions in our workshop · DCM6.1

Built with original DAMOS / A2L

  • ✓DAMOS / A2L 3 files
  • ✓DTC map pack 3 packs

Your file is built with the original map definitions for the DCM6.1 – every map has its real name and axis, nothing is guessed.

Order this file →

ASF workshop · map definitions

Map definitions for the DCM6.1

We tune this ECU in our own workshop. These files are ready in the ASF archive, so your file is made faster and with named maps instead of guesses.

✓DAMOS / A2L3 definition files for DCM6.1 software versions
–MappackOn request
✓Fault code (DTC) package3 parameter packages for DCM6.1
Ask on WhatsAppOrder a file for DCM6.1Answer usually within 1 hour · +382 69 609 609
Have an original read from a DCM6.1? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →

ASF Academy

Learn to tune the DCM6.1 yourself

Delphi DCM6.1 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.

  • Basic reading and writing · from 280 €
  • Intermediate WinOLS and Stage X · from 350 €
  • Advanced complete vehicle tuning · from 1,200 €

Same engine, other makes

How a file is made

  • Read the ECU (OBD or bench, depending on your tool)
  • Upload the original read to the ASF file portal
  • Your software version is matched against the archive
  • Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN

Need a file for this DCM6.1?

Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.

Order this file →

Other engines with the DCM6.1

 

Engine / modelECUModelsYearsWinOLS .ols
Ford 2.0 TDCi 150 hpDCM6.1Mondeo, Kuga, Galaxy2015–201847
Ford 2.0 TDCi 210 hpDCM6.1Edge, S-max, Galaxy2015–201824
Ford 2.0 Diesel 70 hpDCM6.1C Max20165
Ford 2.0 TDCi 162 hpDCM6.1Kuga2016–20175
Ford 2.0 TDCi 136 hpDCM6.1Focus2015–20165
Ford 2.0 TDCi 120 hpDCM6.1S-max, Kuga2015–20165
Ford 2.0 TDCi 116 hpDCM6.1Focus2012–20173
Peugeot 2.0 Diesel 150 hpDCM6.12.0hdi3
Ford 2.0 TDCi 140 hpDCM6.1Galaxy20163
Peugeot 2.0 Diesel 180 hpDCM6.12.0hdi2