Bosch MD1CS005 · Diesel
Ford 1.5 Diesel 95 hp
Focus
The Ford 1.5 Diesel 95 hp (70 kW) runs a Bosch MD1CS005 engine control unit. Our archive holds 2 calibration projects for it across 1 software versions.
Spec sheet
- Make
- Ford
- Fuel
- Diesel
- Factory power
- 95 hp / 70 kW
- ECU
- Bosch MD1CS005
- Software versions
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MD1CS005 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Ford 1.5 Diesel 95 hp. Select: Cars/Vans → Ford → Focus → 1.5 Diesel – 95hp.
Software versions
2 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the MD1CS005 yourself
Bosch MD1CS005 is read with bench with an unlock procedure, then OBD on supported tools. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Ford only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MD1CS005?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MD1CS005
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Ford 1.5 TDCi 120 hp | MD1CS005 | Focus, Transit Connect, Kuga | 2018–2020 | 36 |
| Ford 1.5 TDCi 100 hp | MD1CS005 | Transit | 2018–2020 | 3 |
Stage 1
Stage 2
Stage 1