Bosch DCU15 · Diesel · Trucks & buses
DAF XF105 460 hp (DCU15)
MX13
The DAF XF105 460 hp (DCU15) (338 kW) runs a Bosch DCU15 engine control unit. Our archive holds 2 calibration projects for it across 1 software versions.
Spec sheet
- Make
- DAF
- Type
- Trucks & buses
- Model
- XF105
- Engine
- MX13
- Fuel
- Diesel
- Factory power
- 460 hp / 338 kW
- ECU
- Bosch DCU15
- Software versions
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the DCU15 on this vehicle – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the DAF XF105 460 hp (DCU15). Select: Trucks & buses → DAF → XF105 → – 460hp.
Software versions
2 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the DCU15 yourself
Bosch DCU15 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
More from DAF
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this DCU15?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the DCU15
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| MAN TGX (DCU15) | DCU15 | Euro 5 | 1 | |
| Iveco Stralis 420 hp (DCU15) | DCU15 | 10,3L | 2012 | 4 |
Stage 1
Stage 2
Stage 1