Check before tuning

P0238Boost pressure sensor "A" circuit high

The boost sensor signal is above its normal electrical range.

Repair before tuning. Boost and turbo · standard OBD code, same meaning on every make.

What P0238 means

The boost sensor signal is above its normal electrical range. P0238 is a generic OBD code (SAE J2012), so the meaning is the same on every make. The limits that trigger it come from the ECU calibration of your engine.

Usual causes

Sensor fault, short to 5 V or open ground, damaged connector.

In the workshop

Electrical check of the sensor circuit.

Can I tune a car with P0238?

Not until it is fixed. A tune raises boost, fuel and torque; with P0238 active the engine already runs outside its targets, so the ECU limits power or the fault gets worse. Fix the cause, clear the code, check live data, then read the ECU.

Before any read or write, see ECU read methods. New to the terms? The chiptuning glossary explains them.