Bosch EDC17CP68 · Diesel
Volvo 2.4 D4 190 hp
XC60 · XC 60
The Volvo 2.4 D4 190 hp (140 kW) runs a Bosch EDC17CP68 engine control unit. Our archive holds 14 calibration projects for it across 1 software versions, model years 2015–2017.
Spec sheet
- Make
- Volvo
- Fuel
- Diesel
- Factory power
- 190 hp / 140 kW
- ECU
- Bosch EDC17CP68
- Model years
- 2015–2017
- Software versions
- 1
- EVC WinOLS projects
- 14 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the EDC17CP68 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Volvo 2.4 D4 190 hp. Select: Cars/Vans → Volvo → XC60 / XC 60 → 2.4 D4 – 190hp.
Software versions
14 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the EDC17CP68 yourself
Bosch EDC17CP68 is read with OBD for the calibration and bench or boot for a full backup. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Volvo only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this EDC17CP68?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the EDC17CP68
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Volvo 2.4 D4 181 hp | EDC17CP68 | XC 70 | 2014–2016 | 7 |
Stage 1
Stage 2
Stage 1