Delphi CRD2.30 · Diesel
Mercedes-Benz 2.2 CDI 163 hp
Sprinter
The Mercedes-Benz 2.2 CDI 163 hp (120 kW) runs a Delphi CRD2.30 engine control unit. Our archive holds 2 calibration projects for it across 1 software versions, model years 2010.
Spec sheet
- Make
- Mercedes-Benz
- Fuel
- Diesel
- Factory power
- 163 hp / 120 kW
- ECU
- Delphi CRD2.30
- Model years
- 2010
- Software versions
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the CRD2.30 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Mercedes-Benz 2.2 CDI 163 hp. Select: Cars/Vans → Mercedes-Benz → Sprinter → 2.2 CDI – 163hp.
Software versions
2 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the CRD2.30 yourself
Delphi CRD2.30 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Mercedes-Benz only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this CRD2.30?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the CRD2.30
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mercedes-Benz 2.1 CDI 129 hp | CRD2.30 | Sprinter | 2010 | 2 |
Stage 1
Stage 2
Stage 1