Delphi DCM3.1 · Diesel
Mercedes-Benz 2.1 CDI 136 hp
E-Class
The Mercedes-Benz 2.1 CDI 136 hp (100 kW) runs a Delphi DCM3.1 engine control unit. Our archive holds 3 calibration projects for it across 2 hardware numbers and 2 software versions, model years 2010–2011.
Spec sheet
- Make
- Mercedes-Benz
- Fuel
- Diesel
- Factory power
- 136 hp / 100 kW
- ECU
- Delphi DCM3.1
- Model years
- 2010–2011
- Hardware numbers
- 2
- Software versions
- 2
- EVC WinOLS projects
- 3 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the DCM3.1 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Mercedes-Benz 2.1 CDI 136 hp. Select: Cars/Vans → Mercedes-Benz → E-Class → 2.1 CDI – 136hp.
Hardware numbers
ECU part numbers in our archive (2 in total). Check the label on your ECU.
Software versions
3 EVC WinOLS (.ols) projects across 2 software versions. Calibrations differ per version – a file is always built for your exact one.
Built against verified projects
- ✓DTC map pack 2 packs
Your file is built by our workshop against verified projects for the DCM3.1.
Order this file →ASF Academy
Learn to tune the DCM3.1 yourself
Delphi DCM3.1 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Mercedes-Benz only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this DCM3.1?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the DCM3.1
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mercedes-Benz 1.8 CDI 110 hp | DCM3.1 | A-Class | 2013 | 4 |
Stage 1
Stage 2
Stage 1