Denso RF8 · Diesel
Mazda 2.0 Diesel 140 hp
6
The Mazda 2.0 Diesel 140 hp (103 kW) runs a Denso RF8 engine control unit. Our archive holds 3 calibration projects for it across 1 hardware numbers and 1 software versions, model years 2008.
Tuning & software solutions
Available for the RF8 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Mazda 2.0 Diesel 140 hp. Select: Cars/Vans → Mazda → 6 → 2.0 Diesel – 140hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
Software versions
3 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the RF8 yourself
Denso RF8 is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this RF8?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the RF8
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mazda 2.0 Diesel 110 hp | RF8 | 5 | 2006 | 2 |
Stage 1
Stage 2
Stage 1