Denso MB0797 · Petrol
Jaguar 3.0 Petrol 230 hp
X-type
The Jaguar 3.0 Petrol 230 hp (169 kW) runs a Denso MB0797 engine control unit. Our archive holds 2 calibration projects for it across 1 hardware numbers, model years 2004.
Spec sheet
- Make
- Jaguar
- Fuel
- Petrol
- Factory power
- 230 hp / 169 kW
- ECU
- Denso MB0797
- Model years
- 2004
- Hardware numbers
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MB0797 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Jaguar 3.0 Petrol 230 hp. Select: Cars/Vans → Jaguar → X-type → 3.0 Petrol – 230hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
ASF Academy
Learn to tune the MB0797 yourself
Denso MB0797 is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Jaguar only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MB0797?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1