Magneti Marelli MJ8F3 · Diesel
Fiat 2.3 Diesel 110 hp
Ducato
The Fiat 2.3 Diesel 110 hp (81 kW) runs a Magneti Marelli MJ8F3 engine control unit. Our archive holds 5 calibration projects for it across 1 hardware numbers, model years 2015.
Spec sheet
- Make
- Fiat
- Fuel
- Diesel
- Factory power
- 110 hp / 81 kW
- ECU
- Magneti Marelli MJ8F3
- Model years
- 2015
- Hardware numbers
- 1
- EVC WinOLS projects
- 5 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MJ8F3 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Fiat 2.3 Diesel 110 hp. Select: Cars/Vans → Fiat → Ducato → 2.3 Diesel – 110hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
ASF Academy
Learn to tune the MJ8F3 yourself
Magneti Marelli MJ8F3 is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Fiat only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MJ8F3?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MJ8F3
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Fiat 2.2 Diesel 110 hp | MJ8F3 | Ducato | 2012–2018 | 8 |
| Fiat 1.2 Multijet 84 hp | MJ8F3 | 500L | 2014 | 5 |
| Fiat 2.3 JTD 130 hp | MJ8F3 | Ducato | 2013–2014 | 5 |
| Fiat 1.8 Diesel 110 hp | MJ8F3 | Ducato | 2015 | 2 |
Stage 1
Stage 2
Stage 1