Visteon STAGE10F276 · Diesel
Fiat 2.2 JTD 100 hp
Ducato
The Fiat 2.2 JTD 100 hp (74 kW) runs a Visteon STAGE10F276 engine control unit. Our archive holds 14 calibration projects for it across 1 hardware numbers and 1 software versions, model years 2007–2008.
Spec sheet
- Make
- Fiat
- Fuel
- Diesel
- Factory power
- 100 hp / 74 kW
- ECU
- Visteon STAGE10F276
- Model years
- 2007–2008
- Hardware numbers
- 1
- Software versions
- 1
- EVC WinOLS projects
- 14 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the STAGE10F276 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Fiat 2.2 JTD 100 hp. Select: Cars/Vans → Fiat → Ducato → 2.2 JTD – 100hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
Software versions
14 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the STAGE10F276 yourself
Visteon STAGE10F276 is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Fiat only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this STAGE10F276?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1