Bosch ME17.3 · Petrol
Fiat 1.4 Petrol 180 hp
500
The Fiat 1.4 Petrol 180 hp (132 kW) runs a Bosch ME17.3 engine control unit. Our archive holds 7 calibration projects for it across 1 software versions, model years 2017–2019.
Spec sheet
- Make
- Fiat
- Fuel
- Petrol
- Factory power
- 180 hp / 132 kW
- ECU
- Bosch ME17.3
- Model years
- 2017–2019
- Software versions
- 1
- EVC WinOLS projects
- 7 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the ME17.3 on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Fiat 1.4 Petrol 180 hp. Select: Cars/Vans → Fiat → 500 → 1.4 Petrol – 180hp.
Software versions
7 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the ME17.3 yourself
Bosch ME17.3 is read with OBD for the calibration and bench or boot for a full backup. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Fiat only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this ME17.3?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the ME17.3
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Fiat 1.4 Petrol 140 hp | ME17.3 | Abarth | 2012 | 2 |
Stage 1
Stage 2
Stage 1