Bosch ME7910 · Petrol
Fiat 1.4 Petrol 120 hp
Punto
The Fiat 1.4 Petrol 120 hp (88 kW) runs a Bosch ME7910 engine control unit. Our archive holds 2 calibration projects for it across 1 software versions, model years 2007.
Spec sheet
- Make
- Fiat
- Fuel
- Petrol
- Factory power
- 120 hp / 88 kW
- ECU
- Bosch ME7910
- Model years
- 2007
- Software versions
- 1
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the ME7910 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Fiat 1.4 Petrol 120 hp. Select: Cars/Vans → Fiat → Punto → 1.4 Petrol – 120hp.
Software versions
2 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the ME7910 yourself
Bosch ME7910 is read with OBD for read and write, boot mode for a full read. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Fiat only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this ME7910?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the ME7910
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Fiat 1.4 Petrol 135 hp | ME7910 | 500 | 2009 | 3 |
| Fiat 1.4 Petrol 150 hp | ME7910 | Bravo | 2007–2010 | 3 |
| Fiat 1.4 Petrol 100 hp | ME7910 | 500 | 2008 | 2 |
Stage 1
Stage 2
Stage 1