Magneti Marelli MJ8F3H · Diesel
Fiat 1.3 JTD 90 hp
Doblo
The Fiat 1.3 JTD 90 hp (66 kW) runs a Magneti Marelli MJ8F3H engine control unit. Our archive holds 6 calibration projects for it across 3 hardware numbers and 2 software versions, model years 2012–2015.
Spec sheet
- Make
- Fiat
- Fuel
- Diesel
- Factory power
- 90 hp / 66 kW
- ECU
- Magneti Marelli MJ8F3H
- Model years
- 2012–2015
- Hardware numbers
- 3
- Software versions
- 2
- EVC WinOLS projects
- 6 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MJ8F3H on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Fiat 1.3 JTD 90 hp. Select: Cars/Vans → Fiat → Doblo → 1.3 JTD – 90hp.
Hardware numbers
ECU part numbers in our archive (3 in total). Check the label on your ECU.
Software versions
6 EVC WinOLS (.ols) projects across 2 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF workshop · map definitions
Map definitions for the MJ8F3H
We tune this ECU in our own workshop. These files are ready in the ASF archive, so your file is made faster and with named maps instead of guesses.
ASF Academy
Learn to tune the MJ8F3H yourself
Magneti Marelli MJ8F3H is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MJ8F3H?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MJ8F3H
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Fiat 2.3 JTD 130 hp | MJ8F3H | Ducato, Ducato III, Ducato II | 2011–2018 | 30 |
| Citroën 1.3 HDi 75 hp | MJ8F3H | Nemo | 2010–2015 | 4 |
| Alfa Romeo 1.3 JTDM 85 hp | MJ8F3H | Mito | 2016 | 4 |
| Opel 1.3 CDTI 90 hp | MJ8F3H | Combo | 2012–2014 | 3 |
| Fiat 2.3 JTDM 148 hp | MJ8F3H | Ducato, Ducato III | 2012–2015 | 10 |
| Fiat 2.3 JTD 145 hp | MJ8F3H | Ducato | 2012 | 6 |
| Fiat 2.2 Diesel 149 hp | MJ8F3H | Ducato | 2012–2015 | 5 |
| Fiat 2.3 Diesel 126 hp | MJ8F3H | Ducato | 2011 | 3 |
| Fiat 2.3 JTD 120 hp | MJ8F3H | Ducato | 2012 | 2 |
| Fiat 1.2 Multijet 75 hp | MJ8F3H | Punto Evo | 2012 | 2 |
Stage 1
Stage 2
Stage 1