Engine control unit
Delphi ETC3
Used by DAF. 12 engines and 89 calibration projects in our archive.
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| DAF XF105 460 hp (ETC3) | ETC3 | 2009–2013 | 46 | |
| DAF XF 105 462 hp | ETC3 | 12.9 D | 2009–2012 | 13 |
| DAF XF105 (ETC3) | ETC3 | 4 | ||
| DAF XF85 408 hp (ETC3) | ETC3 | 12.9L | 2011–2012 | 4 |
| DAF XF105 410 hp (ETC3) | ETC3 | 2008–2010 | 4 | |
| DAF XF106 510 hp (ETC3) | ETC3 | 3 | ||
| DAF XF 460 hp (ETC3) | ETC3 | 12.9 D | 2006–2010 | 3 |
| DAF XF105 510 hp (ETC3) | ETC3 | 2009–2010 | 3 | |
| DAF XF 105 510 hp (ETC3) | ETC3 | 12.9 D | 2010 | 3 |
| DAF CF85 408 hp | ETC3 | 12.9L | 2011 | 2 |
| DAF CF410 | ETC3 | 2010 | 2 | |
| DAF XF95 430 hp (ETC3) | ETC3 | 2000–2004 | 2 |
Have an original read from a ETC3? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →
ASF Academy
Learn to tune the ETC3 yourself
Delphi ETC3 is read with the method that fits its processor and software version. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Need a file for this ETC3?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1