Engine control unit
Visteon DCU106
Used by Ford, Land Rover, Peugeot. 11 engines and 37 calibration projects in our archive.
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Ford 2.2 TDCi 86 hp | DCU106 | Transit | 2008–2012 | 9 |
| Ford 2.4 TDCi 114 hp | DCU106 | Transit | 2006–2011 | 4 |
| Ford 2.4 TDCi 100 hp | DCU106 | Transit | 2007 | 4 |
| Ford 2.4 TDCi 140 hp | DCU106 | Transit | 2008–2010 | 4 |
| Ford 2.2 TDCi 140 hp | DCU106 | Transit | 2006–2011 | 3 |
| Ford 2.2 TDCi 115 hp | DCU106 | Transit | 2008–2010 | 3 |
| Ford 2.2 TDCi 100 hp | DCU106 | Transit | 2006–2010 | 2 |
| Peugeot 2.2 HDi 149 hp | DCU106 | Boxer | 2009 | 2 |
| Land Rover 2.4 TD4 123 hp | DCU106 | Defender | 2008 | 2 |
| Ford 2.2 TDCi 131 hp | DCU106 | Transit | 2007 | 2 |
| Land Rover 2.4 Diesel 122 hp | DCU106 | Defender | 2007 | 2 |
Have an original read from a DCU106? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →
ASF Academy
Learn to tune the DCU106 yourself
Visteon DCU106 is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Need a file for this DCU106?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1