Engine control unit
Delphi DCM
Used by Ford, SsangYong, Volkswagen, Kia, Seat, Opel, Renault. 10 engines and 23 calibration projects in our archive.
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Ford 2.0 TDCi 130 hp | DCM | Mondeo | 2006 | 4 |
| Kia 3.5 CRDi 143 hp | DCM | Bongo | 2008 | 3 |
| SsangYong 2.7 Diesel 163 hp | DCM | Rexton | 2004–2005 | 2 |
| SsangYong 2.7 Diesel 162 hp | DCM | Rexton | 2006 | 2 |
| Seat 1.2 TDI 75 hp | DCM | Ibiza | 2011 | 2 |
| Volkswagen 2.0 TDI 150 hp | DCM | Transporter | 2017 | 2 |
| Ford 2.0 TDCi 150 hp | DCM | Mondeo | 2016 | 2 |
| Opel 2.2 Diesel 163 hp | DCM | Antara | 2012 | 2 |
| Volkswagen 1.2 TDI 86 hp | DCM | Polo | 2010 | 2 |
| Renault 1.5 dCi 82 hp | DCM | Clio | 2002 | 2 |
Have an original read from a DCM? Check if we have the file.Drop it on our free checker: 334,000+ calibration projects, result in a second, the file is not uploaded.Check your file →
ASF Academy
Learn to tune the DCM yourself
Delphi DCM is read with OBD or bench, with JTAG/BDM for recovery. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Need a file for this DCM?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1