Temic DL501 · Gearboxes (TCU)
Audi DL501 S tronic 7-speed
The Audi DL501 S tronic 7-speed gearbox uses the Temic DL501 transmission control unit (TCU). Our archive holds 23 calibration projects for it across 10 hardware numbers, model years 2010–2017.
Spec sheet
- Make
- Audi
- Type
- Gearboxes (TCU)
- Model
- DL501 S tronic 7-speed
- ECU
- Temic DL501
- Model years
- 2010–2017
- Hardware numbers
- 10
- EVC WinOLS projects
- 23 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the DL501 on this vehicle – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi DL501 S tronic 7-speed. Select: Gearboxes (TCU) → Audi → DL501 S tronic 7-speed.
Hardware numbers
ECU part numbers in our archive (10 in total). Check the label on your ECU.
ASF Academy
Learn to tune the DL501 yourself
Temic DL501 is read with OBD on supported versions and bench for a full backup. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
More from Audi
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this DL501?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the DL501
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| VW Group DL501 S tronic 7-speed | DL501 | 5 |
Stage 1
Stage 2
Stage 1