Bosch MED17.1.15 · Petrol
Audi 4.2 FSI 371 hp
A8
The Audi 4.2 FSI 371 hp (273 kW) runs a Bosch MED17.1.15 engine control unit. Our archive holds 22 calibration projects for it across 5 hardware numbers and 16 software versions.
Spec sheet
- Make
- Audi
- Fuel
- Petrol
- Factory power
- 371 hp / 273 kW
- ECU
- Bosch MED17.1.15
- Hardware numbers
- 5
- Software versions
- 16
- EVC WinOLS projects
- 22 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MED17.1.15 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 4.2 FSI 371 hp. Select: Cars/Vans → Audi → A8 → 4.2 FSI – 371hp.
Hardware numbers
ECU part numbers in our archive (5 in total). Check the label on your ECU.
Software versions
22 EVC WinOLS (.ols) projects across 16 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the MED17.1.15 yourself
Bosch MED17.1.15 is read with OBD for the calibration and bench or boot for a full backup. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MED17.1.15?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MED17.1.15
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Audi 4.2 FSI 450 hp | MED17.1.15 | RS5, RS4 | 2010–2015 | 35 |
Stage 1
Stage 2
Stage 1