Bosch EDC16CP34M&S · Diesel
Audi 4.1 TDI 325 hp
Q7
The Audi 4.1 TDI 325 hp (239 kW) runs a Bosch EDC16CP34M&S engine control unit. Our archive holds 7 calibration projects for it across 2 hardware numbers and 1 software versions, model years 2008.
Tuning & software solutions
Available for the EDC16CP34M&S on this engine – combine them in one file.
Emission-related solutions are for off-road, motorsport and export use only, where permitted by local law.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 4.1 TDI 325 hp. Select: Cars/Vans → Audi → Q7 → 4.1 TDI – 325hp.
Hardware numbers
ECU part numbers in our archive (2 in total). Check the label on your ECU.
Software versions
7 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the EDC16CP34M&S yourself
Bosch EDC16CP34M&S is read with OBD on most versions, bench or BDM for a full read. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this EDC16CP34M&S?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the EDC16CP34M&S
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Audi 4.1 TDI 319 hp | EDC16CP34M&S | A8 | 2006 | 6 |
Stage 1
Stage 2
Stage 1