Bosch MD1 · Diesel
Audi 3.0 TDI 190 hp
A6
The Audi 3.0 TDI 190 hp (140 kW) runs a Bosch MD1 engine control unit. Our archive holds 3 calibration projects for it across 1 hardware numbers and 1 software versions.
Tuning & software solutions
Available for the MD1 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 3.0 TDI 190 hp. Select: Cars/Vans → Audi → A6 → 3.0 TDI – 190hp.
Hardware numbers
ECU part numbers in our archive (1 in total). Check the label on your ECU.
Software versions
3 EVC WinOLS (.ols) projects across 1 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the MD1 yourself
Bosch MD1 is read with bench with an unlock procedure, then OBD on supported tools. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MD1?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MD1
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Mercedes-Benz 2.0 Petrol 285 hp | MD1 | E-Class | 2019 | 5 |
| Audi 3.0 TDI 218 hp | MD1 | A6 | 2017–2018 | 3 |
| Mercedes-Benz 1.5 Diesel 116 hp | MD1 | A-Class | 2019 | 3 |
| Mercedes-Benz 2.0 Petrol 183 hp | MD1 | E-Class | 2016 | 2 |
Stage 1
Stage 2
Stage 1