Bosch EDC15VM+2 · Diesel
Audi 2.5 TDI 179 hp
A6 Allroad
The Audi 2.5 TDI 179 hp (132 kW) runs a Bosch EDC15VM+2 engine control unit. Our archive holds 4 calibration projects for it across 2 hardware numbers and 2 software versions, model years 2002–2003.
Tuning & software solutions
Available for the EDC15VM+2 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 2.5 TDI 179 hp. Select: Cars/Vans → Audi → A6 Allroad → 2.5 TDI – 179hp.
Hardware numbers
ECU part numbers in our archive (2 in total). Check the label on your ECU.
Software versions
4 EVC WinOLS (.ols) projects across 2 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the EDC15VM+2 yourself
Bosch EDC15VM+2 is read with OBD for read and write, boot mode for a full read. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this EDC15VM+2?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Stage 1
Stage 2
Stage 1