Bosch MED171 · Petrol
Audi 2.0 TFSI 180 hp
A6 · A5
The Audi 2.0 TFSI 180 hp (132 kW) runs a Bosch MED171 engine control unit. Our archive holds 12 calibration projects for it across 2 hardware numbers and 3 software versions, model years 2010–2012.
Spec sheet
- Make
- Audi
- Fuel
- Petrol
- Factory power
- 180 hp / 132 kW
- ECU
- Bosch MED171
- Model years
- 2010–2012
- Hardware numbers
- 2
- Software versions
- 3
- EVC WinOLS projects
- 12 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the MED171 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 2.0 TFSI 180 hp. Select: Cars/Vans → Audi → A6 / A5 → 2.0 TFSI – 180hp.
Hardware numbers
ECU part numbers in our archive (2 in total). Check the label on your ECU.
Software versions
12 EVC WinOLS (.ols) projects across 3 software versions. Calibrations differ per version – a file is always built for your exact one.
ASF Academy
Learn to tune the MED171 yourself
Bosch MED171 is read with OBD for the calibration and bench or boot for a full backup. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this MED171?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the MED171
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Audi 2.0 Petrol 211 hp | MED171 | A4, Q5, TT | 2009–2012 | 9 |
Stage 1
Stage 2
Stage 1