Continental (Siemens) SIMOS10.24 · Petrol
Audi 1.2 TFSI 105 hp
A1
The Audi 1.2 TFSI 105 hp (77 kW) runs a Continental (Siemens) SIMOS10.24 engine control unit. Our archive holds 2 calibration projects for it, model years 2011.
Spec sheet
- Make
- Audi
- Fuel
- Petrol
- Factory power
- 105 hp / 77 kW
- ECU
- Continental (Siemens) SIMOS10.24
- Model years
- 2011
- EVC WinOLS projects
- 2 .ols
- File format
- EVC WinOLS (.ols) · BIN
Tuning & software solutions
Available for the SIMOS10.24 on this engine – combine them in one file.
Power & torque gains
Stage 1 power, torque and dyno chart for the Audi 1.2 TFSI 105 hp. Select: Cars/Vans → Audi → A1 → 1.2 TFSI – 105hp.
ASF Academy
Learn to tune the SIMOS10.24 yourself
Continental (Siemens) SIMOS10.24 is read with OBD on many versions and bench or boot for a full read. In ASF Academy you practise reading and writing on real ECUs, then build the file in WinOLS and Stage X.
- Basic reading and writing · from 280 €
- Intermediate WinOLS and Stage X · from 350 €
- Advanced complete vehicle tuning · from 1,200 €
Same engine, other makes
- Audi only in our archive
How a file is made
- Read the ECU (OBD or bench, depending on your tool)
- Upload the original read to the ASF file portal
- Your software version is matched against the archive
- Verified file back in 5–60 minutes – EVC WinOLS project (.ols) or BIN
Need a file for this SIMOS10.24?
Upload your original read on the ASF file portal. The file is built for your exact software version – verified, not a generic map – and is usually ready in 5–60 minutes.
Other engines with the SIMOS10.24
| Engine / model | ECU | Models | Years | WinOLS .ols |
|---|---|---|---|---|
| Audi 1.2 TFSI 86 hp | SIMOS10.24 | A1, A1 Sportback | 2011–2014 | 13 |
Stage 1
Stage 2
Stage 1